X Ray Ndt Testing Radiographic Testing Ut Used For Welding
Engineering Industry
Main introduction:
RD-2805 is an X-ray machine with automatic intelligent training
machine control system. Its biggest feature is its high intensity
anti-interference ability. Its working mode is continuous 4:1
working exposure, and the maximum exposure time is 15 minutes. This
series of models is divided into directional and circumferential
radiation models. The radiation angle of the directional machine is
40 ± 5 °, the circumferential radiation angle is 360 °, and the maximum penetration of A3 steel thickness is 45mm.
This model is a classic model for field and aerial operations with
small size, light weight (generator weight 26kg), strong
penetration ability and high stability.
Product features:
The designated product for non-destructive testing of the first 1
million KW construction unit in China Jianan, which has been tested
for a long time.
Technical breakthrough, high voltage, short exposure, performance
test, 10,000 films in 30 days
Small and light, strong penetration, earthquake and impact
resistance
Suitable for filming in high-altitude and narrow spaces such as
large-scale power construction unit installation and shipyards
Small size, light weight, easy to carry, time-saving and
labor-saving, strong stability, low failure rate, continuous
exposure without 1:1 rest, which improves filming efficiency by
50%.
Main uses:
RD-2805TH the technical parameters
| Project | RD-2805TH |
input | Input power | Single-phase 50Hz AC 220± 10% V |
Power supply capacity | No less than 2.0 KVA |
output | X - ray tube voltage | 150-280 KVp |
X ray tube current | 5mA |
mA Stability degree | ± 1% |
Ray tube | Focal size | 1.0× 2.4 |
X-ray irradiation range | 360°*25° |
Ray generator | working pressure Cooling mode Insulation way | 0.45MPa ~ 0.5Mpa Anode ground connection radiator Strong wind cold Gas insulation SF6 |
Size weight (kg) | Φ280mm´280mm´620mm |
27 |
Maximum penetration | Thickness steel A3(mm) | 40 mm Fe(5 min) |
condition | focal distance 600mm ,Agfa film,Double lead foil,Liquid temperature 22,Film density ≥1.5 |
| sensitivity | superior 2% |
controller | Size weight Circuit | 325×270×180 < 9(kg) Automatic control and protection |
Environment | working temperature relative humidity Altitude | -30°~ +40° Not more than 85% Not higher 1500m |
methods | fully automatic 2.5:1 Work and rest,Longest continuous exposure time 15mins |
FAQ
Q1. Are you a factory or a trading company?
We are a factory with 30 years of experience.
Q2. What's the MOQ ?
(1). Normally, MOQ is 1 piece. The quantity is depending on the
clients’ needs.
(2)According to customer order, the quantity still can be
negotiated and we will product immeditaly if we dont have stock.
Q3. What is your principle for the samples ?
No free samples. But we provide 1piece as a sample order for all
items.
Q4.Which payment can be acceptable ?
We could accept the payment by T/T, Paypal, Western Union,L/C, etc.
Q5. How about the lead time?
If no stocks, it takes 7 to 15 working days to manufacture after
receiving the advance payment.
If in stock, 2-4 working days are possible. But it depends on the
exact products and quantity.
Q6. What certificates will be offered?
CE and ISO are certified for most products.
Always high quality is offered to avoid any defective products.
Also, protective packaging is offered to avoid destroy during
delivery.
