Portable Industrial Xray Machine for Advanced Non-Destructive
Testing and Inspection in Industrial Applications
Main introduction:
RD-2505 is an X-ray machine with automatic intelligent training
machine control system. Its biggest feature is its high intensity
anti-interference ability. Its working mode is continuous 4:1
working exposure, and the maximum exposure time is 15 minutes. This
series of models is divided into directional and circumferential
radiation models. The radiation angle of the directional machine is
40 ± 5 °, the circumferential radiation angle is 360 °, and the maximum penetration of A3 steel thickness is 45mm.
This model is a classic model for field and aerial operations with
small size, light weight (generator weight 26kg), strong
penetration ability and high stability.
Product features:
1.Light weight, portable, easy to take and operate.
2.Time delay function protect operator away from radiation
3.X-ray generator have over-temperature protection
4.Radiating time to cooling time 1:1
Main uses:
RD-2505 the technical parameters
| Project | RD-2505 |
input | Input power | Single-phase 50Hz AC220V - 265V |
| Power supply capacity | No less than 2.0 KVA |
output | X - ray tube voltage | 150~ 250 KVp |
| X ray tube current | 5mA |
| mA Stability degree | ± 1% |
Ray tube | Focal size | 2.0× 2.0 |
| X-ray irradiation range | 40±5° |
Ray generator | working pressure Cooling mode Insulation way | 0.45MPa ~ 0.5Mpa Anode ground connection radiator Strong wind cold Gas insulation SF6 |
| Size weight (kg) | Φ280×610 |
| | 26 |
Maximum penetration | Thickness steel A3(mm) | 40 mmFe(5 min) |
| condition | focal distance 600mm ,Agfa film,Double lead foil,Liquid temperature 22,Film density ≥1.5 |
| sensitivity | superior 2% |
controller | Size weight Circuit | 325×270×180 < 9(kg) Automatic control and protection |
Environment | working temperature relative humidity Altitude | -30°~ +40° Not more than 85% Not higher 1500m |
methods | fully automatic 4:1 Work and rest,Longest continuous exposure time 15mins |
FAQ
1. Is your Company the Manufacturer or a Trading Company?
We are a manufacturer of NDT x ray equipment in China with
experience engineer working over 30 years.
2. What's the MOQ ?
(1). Normally, MOQ is 1 piece. The quantity is depending on the
clients’ needs.
(2)According to customer order, the quantity still can be
negotiated and we will product immeditaly if we dont have stock.
3. What is your principle for the samples ?
No free samples. But we provide 1piece as a sample order for all
items.
